Straubinger Flute

Featured Artists

•Customer Comments


Find a Technician
Search by State or Country
(uses JavaScript)

View All Technicians
•Flute - USA
•Flute - International

Frequently Asked Questions

Contact Us


Straubinger Flutes

Straubinger™ Pad Certification for Flute
In-depth workshops on installation techniques are made available to flute repair people worldwide. This has proven to be the most effective way to introduce these installation methods to the trade, while at the same time guaranteeing quality control at all stages so that the flute player obtains the best possible performance from his or her instrument.

Upcoming workshops
Workshop description

Straubinger™ Pads are designed specifically for hand-made flutes and consist of different materials and components than a traditional pad. The patented pad support unit and profiled washer are machined to close tolerances, one at a time, on a high precision lathe. We also produce a piccolo and clarinet pad based on the patented flute pad.

In 2009 we released the Straubinger Phoenix™ Flute Pad which was originally installed exclusively on Avanti Flutes, a division of Conn-Selmer and designed by Bickford Brannen.

Our Design
pad assembly

Pad Cup
The pad cup is designed to keep the pad in place so that the pad will come down on the tone hole in precisely the same place each time. Another purpose of the pad cup is to mechanically connect cups to their appropriate companion key or keys.

The stabilizer has a two-fold function. First, it places the pad within four to six thousandths (.004 - .006) of an inch to the correct protrusion from the cup. Further alignment is done with full and partial shims. Second, the stabilizer gives the pad a firm and flat base to rest the pad on. This base gives the partial shims a much better foundation than the curved back of a pad cup.The .004 inch thick shim provides a base upon which to glue whole or partial shims. These shims make it possible to make one portion of the pad protrude more than another or to increase the protrusion of the total pad. On these .004 inch shims, partial shims or additional shims do not ordinarily exceed .001 inch in thickness. Because of the use of these materials and construction techniques, the Straubinger™ Pad actually becomes more stable with the passage of time. The traditional felt pad, however, becomes more unstable over time and requires frequent adjustments.

Pad Support
The pad support unit provides a rigid base for the cushion and supports the skin so that it does not distort the shape of the cushion. The skin, in conjunction with this support, controls the cushion. That is, it keeps the surface of the skin in alignment with the rim of the tone hole. An important aspect of this unit is that it is sufficiently flexible to allow for correction of any imperfections that come from the tone hole or cup. These adjustments are made by further shimming. The traditional felt pad which does not have this support, warps or becomes distorted from the shrinking skin and unstable felt. The result is leaks and poor adjustments.

compare pads

The cushion provides support for the skin when the pad is compressed. The type of material used for this cushion is crucial. The problem with felt is that temperature and humidity change the material dimensionally. One might think that it would be easy to find a synthetic material that would not be affected by the weather. However, many materials are not suitable for a cushion because their recovery rate is too slow. That is, when the pad is compressed and released the material must snap back immediately. This is necessary because the next time the pad is compressed it may be with less pressure or a different key combination and therefore the cushion will not be holding the skin to the tone hole. A synthetic cushion is now available with appropriate dimensions, tolerances, and recovery rate.

The purpose of the skin is not only to make the pad seal air but also to keep the cushion in check. Because the skin is supported on the outer edge of the pad by a rim and in the center by an inner collar, the skin will be supported in a flat plane, much as a drum head would work but without the tension of a head.


The actual installation of the Straubinger™Pad requires careful preparation of the flute. The instrument must be in the very finest mechanical condition in order for the pads to be installed properly. The tone holes must be shaped correctly and the cups perfectly aligned over the tone holes. The spuds must be at a precise height, and the screw washers and bushings (grommets) a particular shape. Special tools are required to perform this work. We offer intensive workshops to cover the concepts, methods of application, and procedures involved in installing the Straubinger™ flute pad. Please see our schedule of upcoming workshops.

Order Flute Pads

If you are a certified Straubinger repair technician, you can complete this PDF document and return it as an email attachment to order pads.

Effective 2024, we are no longer taking phone orders except in emergency situations. We are simply not staffed to handle these and we ask you to please send your order requests in writing. These will be handled in the order received, including phoned-in orders, which only slow things down for everyone. Going forward, we are asking your cooperation in making order requests via email or fax, only.


Straubinger™ Pads are protected by patent 5,417,135.

Return to Top

5920 S. East Street Indianapolis, Indiana 46227 (317) 784-3012 straubingerflutes @ comcast.net
Copyright 2023 Straubinger Flutes. Fine Flute Maker. All Rights Reserved. Last updated December 19, 2023.